dmesg - NVIDIA GeForce 210
CPU0 microcode updated early to revision 0x28, date = 2012-04-24
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-5) ) #1 SMP Debian 3.9.8-1
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007e6d8fff] usable
BIOS-e820: [mem 0x000000007e6d9000-0x000000007e721fff] ACPI NVS
BIOS-e820: [mem 0x000000007e722000-0x000000007e72afff] ACPI data
BIOS-e820: [mem 0x000000007e72b000-0x000000007f5f7fff] reserved
BIOS-e820: [mem 0x000000007f5f8000-0x000000007f5f9fff] usable
BIOS-e820: [mem 0x000000007f5fa000-0x000000007f609fff] reserved
BIOS-e820: [mem 0x000000007f60a000-0x000000007f614fff] ACPI NVS
BIOS-e820: [mem 0x000000007f615000-0x000000007f639fff] reserved
BIOS-e820: [mem 0x000000007f63a000-0x000000007f67cfff] ACPI NVS
BIOS-e820: [mem 0x000000007f67d000-0x000000007f7fffff] usable
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: MSI MS-7681/P67A-GD65 (MS-7681), BIOS V1.15 10/27/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x27f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask F80000000 write-back
2 base 080000000 mask F80000000 uncachable
3 base 27F800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcf40-0x000fcf4f] mapped at [ffff8800000fcf40]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01859000, 0x01859fff] PGTABLE
BRK [0x0185a000, 0x0185afff] PGTABLE
BRK [0x0185b000, 0x0185bfff] PGTABLE
init_memory_mapping: [mem 0x27f600000-0x27f7fffff]
[mem 0x27f600000-0x27f7fffff] page 2M
BRK [0x0185c000, 0x0185cfff] PGTABLE
init_memory_mapping: [mem 0x27c000000-0x27f5fffff]
[mem 0x27c000000-0x27f5fffff] page 2M
init_memory_mapping: [mem 0x200000000-0x27bffffff]
[mem 0x200000000-0x27bffffff] page 2M
BRK [0x0185d000, 0x0185dfff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x7e6d8fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7e5fffff] page 2M
[mem 0x7e600000-0x7e6d8fff] page 4k
init_memory_mapping: [mem 0x7f5f8000-0x7f5f9fff]
[mem 0x7f5f8000-0x7f5f9fff] page 4k
init_memory_mapping: [mem 0x7f67d000-0x7f7fffff]
[mem 0x7f67d000-0x7f7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x356d0000-0x36b5ffff]
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 000000007e722068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000007e729e18 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 000000007e722150 07CC2 (v02 ALASKA A M I 00000015 INTL 20051117)
ACPI: FACS 000000007f60cf80 00040
ACPI: APIC 000000007e729f10 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 000000007e729f88 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 000000007e72a090 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 000000007e72a0d0 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: ASF! 000000007e72a108 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027f7fffff]
Initmem setup node 0 [mem 0x00000000-0x27f7fffff]
NODE_DATA [mem 0x27f7f4000-0x27f7f7fff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880276e00000-ffff88027ddfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x27f7fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x7e6d8fff]
node 0: [mem 0x7f5f8000-0x7f5f9fff]
node 0: [mem 0x7f67d000-0x7f7fffff]
node 0: [mem 0x100000000-0x27f7fffff]
On node 0 totalpages: 2088954
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 7030 pages used for memmap
DMA32 zone: 514142 pages, LIFO batch:31
Normal zone: 21476 pages used for memmap
Normal zone: 1570816 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000007e6d9000 - 000000007e722000
PM: Registered nosave memory: 000000007e722000 - 000000007e72b000
PM: Registered nosave memory: 000000007e72b000 - 000000007f5f8000
PM: Registered nosave memory: 000000007f5fa000 - 000000007f60a000
PM: Registered nosave memory: 000000007f60a000 - 000000007f615000
PM: Registered nosave memory: 000000007f615000 - 000000007f63a000
PM: Registered nosave memory: 000000007f63a000 - 000000007f67d000
PM: Registered nosave memory: 000000007f800000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0x7f800000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88027f400000 s84800 r8192 d21696 u524288
pcpu-alloc: s84800 r8192 d21696 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060371
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8144616k/10477568k available (3646k kernel code, 2121752k absent, 211200k reserved, 3109k data, 880k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
NR_IRQS:33024 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3292.369 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.73 BogoMIPS (lpj=13169476)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20130117
ACPI: All ACPI Tables successfully acquired
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
CPU1 microcode updated early to revision 0x28, date = 2012-04-24
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU2 microcode updated early to revision 0x28, date = 2012-04-24
smpboot: Booting Node 0, Processors #1 #2 #3 OK
CPU3 microcode updated early to revision 0x28, date = 2012-04-24
Brought up 4 CPUs
smpboot: Total of 4 processors activated (26338.95 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7e6d9000-0x7e721fff] (299008 bytes)
PM: Registering ACPI NVS region [mem 0x7f60a000-0x7f614fff] (45056 bytes)
PM: Registering ACPI NVS region [mem 0x7f63a000-0x7f67cfff] (274432 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000007f60bc18 0038C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: SSDT 000000007f60ce18 00084 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf9107000-0xf910700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf9106000-0xf91063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf9100000-0xf9103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf9105000-0xf91053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018a
pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf9104000-0xf91040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 24: [io 0xf020-0xf02f]
pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [10de:0a65] type 00 class 0x030000
pci 0000:02:00.0: reg 10: [mem 0xf8000000-0xf8ffffff]
pci 0000:02:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:02:00.0: reg 24: [io 0xd000-0xd07f]
pci 0000:02:00.0: reg 30: [mem 0xf9000000-0xf907ffff pref]
pci 0000:02:00.1: [10de:0be3] type 00 class 0x040300
pci 0000:02:00.1: reg 10: [mem 0xf9080000-0xf9083fff]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.1: bridge window [mem 0xf8000000-0xf90fffff]
pci 0000:00:01.1: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1b4b:91a3] type 00 class 0x01018f
pci 0000:04:00.0: reg 10: [io 0xc040-0xc047]
pci 0000:04:00.0: reg 14: [io 0xc030-0xc033]
pci 0000:04:00.0: reg 18: [io 0xc020-0xc027]
pci 0000:04:00.0: reg 1c: [io 0xc010-0xc013]
pci 0000:04:00.0: reg 20: [io 0xc000-0xc00f]
pci 0000:04:00.0: reg 24: [mem 0xfb610000-0xfb6107ff]
pci 0000:04:00.0: reg 30: [mem 0xfb600000-0xfb60ffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:05:00.0: reg 10: [mem 0xfb500000-0xfb501fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:06:00.0: [1b21:1080] type 01 class 0x060400
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
pci 0000:07:01.0: [1409:7168] type 00 class 0x070002
pci 0000:07:01.0: reg 10: [io 0xb080-0xb09f]
pci 0000:07:01.0: reg 18: [io 0xb0b0-0xb0b7]
pci 0000:07:01.0: reg 1c: [io 0xb0a0-0xb0a7]
pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
pci 0000:07:02.0: reg 10: [mem 0xfb400000-0xfb4007ff]
pci 0000:07:02.0: reg 14: [io 0xb000-0xb07f]
pci 0000:07:02.0: supports D2
pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:06:00.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:08:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:08:00.0: reg 10: [mem 0xfb300000-0xfb301fff 64bit]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:09:00.0: reg 10: [io 0xa000-0xa0ff]
pci 0000:09:00.0: reg 18: [mem 0xd2104000-0xd2104fff 64bit pref]
pci 0000:09:00.0: reg 20: [mem 0xd2100000-0xd2103fff 64bit pref]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 09]
pci 0000:00:1c.6: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.6: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci 0000:0a:00.0: [197b:2362] type 00 class 0x010185
pci 0000:0a:00.0: reg 10: [io 0x9040-0x9047]
pci 0000:0a:00.0: reg 14: [io 0x9030-0x9033]
pci 0000:0a:00.0: reg 18: [io 0x9020-0x9027]
pci 0000:0a:00.0: reg 1c: [io 0x9010-0x9013]
pci 0000:0a:00.0: reg 20: [io 0x9000-0x900f]
pci 0000:0a:00.0: reg 24: [mem 0xfb200000-0xfb2001ff]
pci 0000:0a:00.0: PME# supported from D3hot
pci 0000:00:1c.7: PCI bridge to [bus 0a]
pci 0000:00:1c.7: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.7: bridge window [mem 0xfb200000-0xfb2fffff]
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
ACPI: No dock devices found.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x7e6d9000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f5fa000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
e820: reserve RAM buffer [mem 0x27f800000-0x27fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0a00-0x0a0f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: [io 0x0400-0x0453] has been reserved
system 00:08: [io 0x0458-0x047f] has been reserved
system 00:08: [io 0x1180-0x119f] has been reserved
system 00:08: [io 0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:09: [io 0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.1: bridge window [mem 0xf8000000-0xf90fffff]
pci 0000:00:01.1: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:06:00.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06-07]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.6: PCI bridge to [bus 09]
pci 0000:00:1c.6: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.6: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 0a]
pci 0000:00:1c.7: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.7: bridge window [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf90fffff]
pci_bus 0000:02: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:05: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:06: resource 4 [io 0x0000-0x03af]
pci_bus 0000:06: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:06: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:06: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: resource 10 [mem 0x80000000-0xffffffff]
pci_bus 0000:07: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:07: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:08: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:09: resource 0 [io 0xa000-0xafff]
pci_bus 0000:09: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:0a: resource 1 [mem 0xfb200000-0xfb2fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 21056k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7a6d9000-0x7e6d9000] (64MB) mapped at [ffff88007a6d9000-ffff88007e6d8fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1377008777.468:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15948
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.6: irq 46 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 47 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:07:01.0: ignoring Timedia subdevice 4079 for parport_serial
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2013-08-20 14:26:18 UTC (1377008778)
Freeing unused kernel memory: 880k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 440k freed
Freeing unused kernel memory: 520k freed
udevd[69]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:09:00.0: irq 48 for MSI/MSI-X
r8169 0000:09:00.0 eth0: RTL8168e/8111e at 0xffffc90000c66000, 8c:89:a5:60:f5:f0, XID 0c200000 IRQ 48
r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new device driver usb
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 53 for MSI/MSI-X
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.9-1-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:05:00.0
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
xHCI xhci_add_endpoint called for root hub
ehci-pci 0000:00:1a.0: EHCI Host Controller
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
SCSI subsystem initialized
ACPI: bus type ATA registered
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.9-1-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf9106000
libata version 3.00 loaded.
wmi: Mapper loaded
ahci 0000:04:00.0: version 3.0
ahci 0000:04:00.0: irq 54 for MSI/MSI-X
ahci 0000:04:00.0: controller can do FBS, turning on CAP_FBS
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.9-1-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:08:00.0: irq 55 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 56 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 57 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 58 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 59 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.9-1-amd64 xhci_hcd
usb usb5: SerialNumber: 0000:08:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf9105000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.9-1-amd64 xhci_hcd
usb usb6: SerialNumber: 0000:08:00.0
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl IDE mode
ahci 0000:04:00.0: flags: 64bit ncq fbs pio
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610100 irq 54
ata2: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610180 irq 54
ata3: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610200 irq 54
ata4: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610280 irq 54
ata5: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610300 irq 54
ata6: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610380 irq 54
ata7: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610400 irq 54
ata8: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610480 irq 54
ahci 0000:0a:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:0a:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xfb200000 port 0xfb200100 irq 19
ata10: SATA max UDMA/133 abar m512@0xfb200000 port 0xfb200180 irq 19
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.9-1-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi10 : ata_piix
scsi11 : ata_piix
ata11: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf090 irq 14
ata12: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf098 irq 15
ata_piix 0000:00:1f.5: MAP [
P0 -- P1 -- ]
usb 3-1: new high-speed USB device number 2 using ehci-pci
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi12 : ata_piix
scsi13 : ata_piix
ata13: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
ata14: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-9: INTEL SSDSC2CT240A3, 300i, max UDMA/133
ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata10: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata8.00: configured for UDMA/66
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CT24 300i PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 7:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 7:0:0:0: Attached scsi generic sg1 type 3
usb 3-1: New USB device found, idVendor=8087, idProduct=0024
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: new high-speed USB device number 2 using ehci-pci
firewire_core 0000:07:02.0: created device fw0: GUID 0010dc0001d0f4ff, S400
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
usb 3-1.1: new high-speed USB device number 3 using ehci-pci
usb 3-1.1: New USB device found, idVendor=9710, idProduct=7830
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.1: Product: USB-MAC Controller
usb 3-1.1: Manufacturer: Moschip Semiconductor
usb 3-1.1: SerialNumber: cd1dcb85
tsc: Refined TSC clocksource calibration: 3292.520 MHz
Switching to clocksource tsc
usb 3-1.3: new full-speed USB device number 4 using ehci-pci
ata11.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata11.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata11.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
ata11.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata11.01: ATAPI: TSSTcorp CDDVDW SH-222AB, SB01, max UDMA/100
ata11.00: configured for UDMA/133
ata11.01: configured for UDMA/100
scsi 10:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
scsi 10:0:1:0: CD-ROM TSSTcorp CDDVDW SH-222AB SB01 PQ: 0 ANSI: 5
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 10:0:1:0: Attached scsi generic sg3 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 10:0:1:0: Attached scsi CD-ROM sr0
sdb: sdb1 sdb2 < sdb5 > sdb3
sd 10:0:0:0: [sdb] Attached SCSI disk
usb 3-1.3: New USB device found, idVendor=047f, idProduct=c00e
usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.3: Product: Plantronics C310
usb 3-1.3: Manufacturer: Plantronics
usb 3-1.3: SerialNumber: 823608FDEDF8B84D99C4F9B8DEA204AE
hidraw: raw HID events driver (C) Jiri Kosina
usb 4-1.1: new low-speed USB device number 3 using ehci-pci
usb 4-1.1: New USB device found, idVendor=03f0, idProduct=0024
usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.1: Product: HP Basic USB Keyboard
usb 4-1.1: Manufacturer: CHICONY
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/input/input2
hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.1/input0
input: Plantronics Plantronics C310 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.3/input/input3
hid-generic 0003:047F:C00E.0002: input,hiddev0,hidraw1: USB HID v1.00 Device [Plantronics Plantronics C310] on usb-0000:00:1a.0-1.3/input3
usb 4-1.2: new low-speed USB device number 4 using ehci-pci
ata12.01: failed to resume link (SControl 0)
usb 4-1.2: New USB device found, idVendor=046d, idProduct=c051
usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.2: Product: USB-PS/2 Optical Mouse
usb 4-1.2: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input4
hid-generic 0003:046D:C051.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2/input0
ata12.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata12.01: SATA link down (SStatus 4 SControl 0)
ata12.00: ATA-8: ST3250318AS, CC38, max UDMA/133
ata12.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata12.00: configured for UDMA/133
scsi 11:0:0:0: Direct-Access ATA ST3250318AS CC38 PQ: 0 ANSI: 5
sd 11:0:0:0: Attached scsi generic sg4 type 0
sd 11:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 11:0:0:0: [sdc] Write Protect is off
sd 11:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 11:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 11:0:0:0: [sdc] Attached SCSI disk
md: md0 stopped.
md: bind
md: bind
md: raid1 personality registered for level 1
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 249999327232
md0: unknown partition table
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
raid6: sse2x1 9032 MB/s
raid6: sse2x2 10999 MB/s
raid6: sse2x4 12486 MB/s
raid6: using algorithm sse2x4 (12486 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 25342.000 MB/sec
Btrfs loaded
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
udevd[523]: starting version 175
ACPI: Requesting acpi_cpufreq
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 60 for MSI/MSI-X
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
microcode: Microcode Update Driver: v2.00 , Peter Oruba
snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
nvidia: module license 'NVIDIA' taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
usb 3-1.1: applying rev.C fixup
usb 3-1.1: applying rev.C fixup
MOSCHIP usb-ethernet driver 3-1.1:1.0 eth0: register 'MOSCHIP usb-ethernet driver' at usb-0000:00:1a.0-1.1, MOSCHIP 7830/7832/7730 usb-NET adapter, 00:0a:cd:1d:cb:85
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
parport1: PC-style at 0xb0b0 (0xb0a0), irq 17 [PCSPP,TRISTATE]
4:2:1: cannot get freq at ep 0x1
usb_audio: Warning! Unlikely big volume range (=10361), cval->res is probably wrong.
usb_audio: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/10361/1[ 3.380562] usbcore: registered new interface driver snd-usb-audio
0000:07:01.0: ttyS1 at I/O 0xb080 (irq = 17) is a 16550A
0000:07:01.0: ttyS2 at I/O 0xb088 (irq = 17) is a 16550A
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
hda_intel: Disabling MSI
hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:01:00.0 to PCI:0000:02:00.0
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card3/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card3/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card3/input19
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card3/input20
nvidia 0000:02:00.0: enabling device (0000 -> 0003)
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
Adding 12256564k swap on /dev/sda1. Priority:-1 extents:1 across:12256564k SS
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
fuse init (API version 7.21)
loop: module loaded
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
Key type dns_resolver registered
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x1e9 offMax=0xc9c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.16_Debian (interface 0x001a0005).
vboxpci: IOMMU not found (not registered)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
lp0: using parport0 (polling).
lp1: using parport1 (interrupt-driven).
ppdev: user-space parallel port driver
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
r8169 0000:09:00.0: firmware: agent loaded rtl_nic/rtl8168e-2.fw into memory
r8169 0000:09:00.0 eth1: link down
r8169 0000:09:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
IPv6: eth2: IPv6 duplicate address fe80::20a:cdff:fe1d:cb85 detected!
r8169 0000:09:00.0 eth1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
mysql-workbench[5482]: segfault at 0 ip 00007f0bb717b871 sp 00007fffa322b9f8 error 4 in libc-2.17.so[7f0bb702c000+1a2000]
4:2:1: cannot get freq at ep 0x1
4:2:1: cannot get freq at ep 0x1
4:1:1: cannot get freq at ep 0x81
4:1:1: cannot get freq at ep 0x81
4:1:1: cannot get freq at ep 0x81
4:1:1: cannot get freq at ep 0x81
usb 3-1.4: new high-speed USB device number 5 using ehci-pci
usb 3-1.4: New USB device found, idVendor=0bb4, idProduct=0c97
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.4: Product: Android Phone
usb 3-1.4: Manufacturer: HTC
usb 3-1.4: SerialNumber: HT03SNX00307
Initializing USB Mass Storage driver...
scsi14 : usb-storage 3-1.4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 14:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
sd 14:0:0:0: Attached scsi generic sg5 type 0
sd 14:0:0:0: [sdd] Attached SCSI removable disk